[1]余明阳,米彩盈.基于子模型技术的复杂轨道车辆车体结构优化分析[J].机车电传动,2016,(03):28-32.[doi:10.13890/j.issn.1000-128x.2016.03.007]
 YU Mingyang,MI Caiying.Structure Optimization Analysis for Complex Rail Vehicle Body Based on Sub-model[J].Electric Drive for Locomotives,2016,(03):28-32.[doi:10.13890/j.issn.1000-128x.2016.03.007]
点击复制

基于子模型技术的复杂轨道车辆车体结构优化分析()
分享到:

机车电传动[ISSN:1000-128X/CN:43-1125/U]

卷:
期数:
2016年03期
页码:
28-32
栏目:
研究开发
出版日期:
2016-05-10

文章信息/Info

Title:
Structure Optimization Analysis for Complex Rail Vehicle Body Based on Sub-model
文章编号:
1000-128X(2016)03-0028-05
作者:
余明阳米彩盈
(西南交通大学机械工程学院,四川 成都 610031)
Author(s):
YU Mingyang MI Caiying
(School of Mechanical Engineering, Southwest Jiaotong University, Chengdu, Sichuan 610031, China)
关键词:
轨道车辆车体结构有限元法子模型技术应力优化刚度协调
Keywords:
vehicle structure of rail vehicle body finite element method sub-model technology stress optimization stiffness coordination
分类号:
U260.32
DOI:
10.13890/j.issn.1000-128x.2016.03.007
文献标志码:
A
摘要:
为了考察某复杂轨道车辆车体底架中部纵向连杆结构承受纵向压缩载荷的能力,分别将纵向连杆离散成体单元和壳单元,对整车模型进行纵向压缩工况计算,分析2 种常规建模方式的计算结果差异和缺陷。为了解决以上2 种常规建模方式存在的问题,提出在子模型中对纵向连杆关注区域全部使用体单元建模的方法来得到纵向连杆区域精确的应力结果,并根据精确计算结果对该区域的局部结构进行优化。分析结果表明:在车体结构有限元强度分析过程中,为了解决常规建模方式存在的问题,在合理选择切割边界的情况下,采用子模型技术可以更加快速精确地获得关注区域的应力结果;在车体结构设计中,充分考虑结构刚度的协调性有利于提高车体结构强度。
Abstract:
The longitudinal rod, a key structure in the middle of a complex rail vehicle body’s underframe, was respectively dispersed into the solid element and shell element in the structure strength analysis for the whole body based on the operation condition of longitudinal compression, as well as the difference and defects of the two conventional modeling methods were indicated. In order to solve the problems of conventional modeling methods, it’s presented that using solid element to disperse longitudinal rod and its surrounding parts in the sub-model to receive precise result, which was helpful for the structure optimization analysis. The results showed: using sub-model technology, in the proceed of analyzing structure strength of the complex rail vehicle body, could obtain more accurate result efficiently with proper cut-boundary; In the design of body structure, taking more consideration on the coordination of the structure stiffness was beneficial to improve the body structure strength.

参考文献/References:

[1]马纪军,田葆栓,宋银川. 70% 低地板轻轨车的有限元分析计算[J]. 铁道车辆,2007,45(3):9-12.
[2]金希红,袁文辉. 重载电力机车车体结构设计及优化分析[J]. 电力机车与城轨车辆,2012,35(5).
[3]崔磊,毛江鸿,金伟良,等. 基于多边界切割插值的改进子模型分析方法[J]. 计算力学学报,2015,32(5):619-625.
[4]ANSYS company. ANSYS Advanced Analysis Techniques Guide [M].USA: ANSYS company,2009.
[5]王欢,戴焕云,池茂儒. 国外100% 低地板轻轨车辆发展概述[J]. 国外铁道车辆.2012,49(2):8.
[6]EN 12663-1/2010,Structural requirements of railway vehicle bodies[S].Berlin:Beuth Verla-g GmbH,2010.
[7]UIC 566,Beanspruchungen von Reisen-zugwagenk?sten und deren Anbauteilen[S]. Internationaler Eisenbahn-verband, 1992.
 [8]EN 10025-5:2004,Hot rolled products of structural steels-Part2: Technical delivery conditions for non-alloy structural steels[S].

相似文献/References:

[1]林达文,彭立群,黄 涛,等.轨道车辆空气弹簧振动试验台的设计及应用研究[J].机车电传动,2015,(03):86.[doi:10.13890/j.issn.1000-128x.2015.03.025]
 LIN Dawen,PENG Liqun,HUANG Tao,et al.Design and Application of Air Spring Vibration Bench for Rail Vehicle[J].Electric Drive for Locomotives,2015,(03):86.[doi:10.13890/j.issn.1000-128x.2015.03.025]
[2]田爱琴,李文化,赵红伟.城际动车组车体研制[J].机车电传动,2015,(02):7.[doi:10.13890/j.issn.1000-128x.2015.02.003]
 TIAN Aiqin,LI Wenhua,ZHAO Hongwei.Design of Intercity EMUs Car Body[J].Electric Drive for Locomotives,2015,(03):7.[doi:10.13890/j.issn.1000-128x.2015.02.003]
[3]王敏,苗 武,付秀洪.轨道车辆轴瓦结构齿轮箱温升高问题分析及改进[J].机车电传动,2015,(02):112.[doi:10.13890/j.issn.1000-128x.2015.02.028]
[4]谭海云,李 勇.蓄电池牵引在上海地铁16 号线车辆上的应用[J].机车电传动,2015,(06):83.[doi:10.13890/j.issn.1000-128x.2015.06.022]
 TAN Haiyun,LI Yong.Application of Battery Traction in Shanghai Metro Line 16 Vehicle[J].Electric Drive for Locomotives,2015,(03):83.[doi:10.13890/j.issn.1000-128x.2015.06.022]
[5]陈灿辉,陈文海,程海涛,等.轨道车辆空气弹簧的阻尼特性试验研究[J].机车电传动,2014,(02):99.[doi:10.13890/j.issn.1000-128x.2014.02.025]
 CHEN Can-hui,CHEN Wen-hai,CHENG Hai-tao,et al.Test Research on Airspring Damping Characteristics for Rail Vehicles[J].Electric Drive for Locomotives,2014,(03):99.[doi:10.13890/j.issn.1000-128x.2014.02.025]
[6]张秋敏,郝明远,路奇,等.轨道车辆对接触网产生磁场的屏蔽效能研究[J].机车电传动,2016,(04):43.[doi:10.13890/j.issn.1000-128x.2016.04.100]
 ZHANG Qiumin,HAO Mingyuan,LU Qi,et al.Study on Magnetic Field Shielding of Railway VehiclesCaused by Contact Networks[J].Electric Drive for Locomotives,2016,(03):43.[doi:10.13890/j.issn.1000-128x.2016.04.100]
[7]林达文,彭立群,黄涛,等.轨道客车空气弹簧扭转试验台的设计及应用研究[J].机车电传动,2016,(04):95.[doi:10.13890/j.issn.1000-128x.2016.04.022]
 Lin Dawen,Peng Liqun,Huang Tao,et al.Design and Application Research of Railway VehiclesAir Spring Torsion Test Bench[J].Electric Drive for Locomotives,2016,(03):95.[doi:10.13890/j.issn.1000-128x.2016.04.022]
[8]徐世东,张红江,朱佳,等.轨道车辆电磁兼容性标准介绍及分析[J].机车电传动,2013,(06):82.
 XU Shi-dong,ZHANG Hong-jiang,ZHU Jia,et al.Introduction and Analysis of Railway Vehicle EMC Standard[J].Electric Drive for Locomotives,2013,(03):82.
[9]李瑞霞,赵力,齐双强,等.轨道车辆车轴强度及疲劳裂纹扩展寿命分析[J].机车电传动,2013,(02):74.[doi:10.13890/j.issn.1000-128x.2013.02.024]
 LI Rui-xia,ZHAO Li,QI Shuang-qiang,et al.Analysis of Rail Vehicle Axle Strength and Fatigue Crack Propagation Life[J].Electric Drive for Locomotives,2013,(03):74.[doi:10.13890/j.issn.1000-128x.2013.02.024]
[10]丁杰,唐玉兔.轨道车辆制动电阻的CFD模拟[J].机车电传动,2012,(04):37.[doi:10.13890/j.issn.1000-128x.2012.04.011]
 DING Jie,TANG Yu-tu.CFD Simulation for Brake Resistor of Rail Vehicle[J].Electric Drive for Locomotives,2012,(03):37.[doi:10.13890/j.issn.1000-128x.2012.04.011]

备注/Memo

备注/Memo:
作者简介:余明阳(1990-),男,硕士研究生,研究方向为铁道车辆结构安全可靠性研究。
收稿日期:2016-03-14
 基金项目:国家国际科技合作专项项目(2013DFA71330)
更新日期/Last Update: 2016-05-10