[1]吴承书,米智楠,叶明盛,等.机车轴端光电转速传感器优化设计[J].机车电传动,2013,(03):22-25.[doi:10.13890/j.issn.1000-128x.2013.03.004]
 WU Cheng-shu,MI Zhi-nan,YE Ming-sheng,et al.Optimal Design of Photoelectric Rotating-speed Sensor at Axle End of Locomotive[J].Electric Drive for Locomotives,2013,(03):22-25.[doi:10.13890/j.issn.1000-128x.2013.03.004]
点击复制

机车轴端光电转速传感器优化设计()
分享到:

机车电传动[ISSN:1000-128X/CN:43-1125/U]

卷:
期数:
2013年03期
页码:
22-25
栏目:
研究开发
出版日期:
2013-05-10

文章信息/Info

Title:
Optimal Design of Photoelectric Rotating-speed Sensor at Axle End of Locomotive
文章编号:
1000-128X(2013)03-0022-04
作者:
吴承书1 2 米智楠1 叶明盛2 张燕亮2 龚运生2
1.同济大学机械工程学院 2.宁波南车时代传感技术有限公司技术中心
Author(s):
WU Cheng-shu 1、2 MI Zhi-nan1 YE Ming-sheng2 ZHANG Yan-liang2 GONG Yun-sheng2
(1. School of Mechanical Engineering, Tongji University, Shanghai 200092, China; 2. Technical Center, Ningbo CSR Times Transducer Technique Co., Ltd., Ningbo, Zhejiang 315021, China)
关键词:
机车光电转速传感器光电模块编码器光栅片优化设计
Keywords:
locomotive photoelectric rotating-speed sensor photoelectric module encoder grating tablets optimal design
分类号:
TP212, U260.5
DOI:
10.13890/j.issn.1000-128x.2013.03.004
摘要:
针对原有基于TB/T 2760—1999标准设计生产的光电式转速传感器在机车速度提高后不断发生故障的现象,采用高速编码器等新技术、新工艺、新材料对产品整体进行有针对性的优化设计,并对优化设计后传感器的总体结构和主要技术特点进行了介绍。试验验证以及在各机务段的批量装车考核表明,新产品性能优良,各项性能指标均很好地满足了设计要求。
Abstract:
According to the fault of photoelectric rotating-speed sensor based on TB/T 2760-1999 after locomotive speedup, new technology and material utility of high-speed encoder was adopted for product integral optimized design. Collective structure and main technical specification of the optimized sensor was introduced. Experiment and batch on-board examination proved that the new product had good performance and satisfied the design requirement of every index.

参考文献/References:

[1] 卢长根,厉航锋,周友佳. 机车轴端光电转速传感器故障分析[J]. 机车电传动,2006(4):23-26.
[2] 李陆新. 机车轴端光电式转速传感器的改进设计[J]. 机车电传动,2003(1):56,58.
[3] 谢斌,李国宁,等. 神经网络在机车测速传感器故障诊断中的应用[J]. 机车电传动,2012(6):84-87.
[4] 米哲涛,曹雷. 霍尔元件在电流传感器中的应用[J]. 机车电传动,2011(1):32-35.

相似文献/References:

[1]端木瑛,张委袖,姚 远.重载机车车钩静态最大稳钩能力分析[J].机车电传动,2015,(05):26.[doi:10.13890/j.issn.1000-128x.2015.05.007]
 DUAN Muying,ZHANG Weixiu,YAO Yuan.Analysis on the Maximum Static Longitudinal Force of Heavy Haul Locomotive Coupler[J].Electric Drive for Locomotives,2015,(03):26.[doi:10.13890/j.issn.1000-128x.2015.05.007]
[2]余华,李岩,李国锋,等.应用于机车变流器的分段调制工程实现方法[J].机车电传动,2014,(06):43.[doi:10.13890/j.issn.1000-128x.2014.06.101]
 YU Hua,LI Yan,LI Guofeng,et al.Project Achieving Method of Subsection Modulation Technique Applied on Diesel Locomotive Converter[J].Electric Drive for Locomotives,2014,(03):43.[doi:10.13890/j.issn.1000-128x.2014.06.101]
[3]吴志东.机车制动电阻装置噪声研究及控制对策[J].机车电传动,2014,(05):20.[doi:10.13890/j.issn.1000-128x.2014.05.006]
 WU Zhidong.Research and Control Measures on Locomotive Braking Resistor Noise[J].Electric Drive for Locomotives,2014,(03):20.[doi:10.13890/j.issn.1000-128x.2014.05.006]
[4]徐爱,何银春,龚运生.防水型机车压力传感器设计[J].机车电传动,2014,(02):62.[doi:10.13890/j.issn.1000-128x.2014.02.014]
 XU Ai,HE Yin-chun,et al.Design of Waterproof Pressure Sensor for Locomotive[J].Electric Drive for Locomotives,2014,(03):62.[doi:10.13890/j.issn.1000-128x.2014.02.014]
[5]倪大成,应 婷,张 宇. 机车牵引主电路接地检测回路共模电压研究[J].机车电传动,2016,(05):1.[doi:10.13890/j.issn.1000-128x.2016.05.105]
 NI Dacheng,YING Ting,ZHANG Yu. Research on Grounding-protection Equipment Common-mode Voltage of Electric Locomotive Traction Main Circuit[J].Electric Drive for Locomotives,2016,(03):1.[doi:10.13890/j.issn.1000-128x.2016.05.105]
[6]倪大成,应婷,张宇.机车牵引主电路接地检测回路共模电压研究[J].机车电传动,2016,(05):63.[doi:10.13890/j.issn.1000-128x.2016.05.105]
 NI Dacheng,YING Ting,ZHANG Yu.Grounding Detection Circuit Common-mode Voltageof Electric Locomotive Traction Main Circuit[J].Electric Drive for Locomotives,2016,(03):63.[doi:10.13890/j.issn.1000-128x.2016.05.105]
[7]侯建文,刘建新,陈迪来,等.抗蛇行减振器横向安装位置对机车动力学性能的影响[J].机车电传动,2013,(04):32.[doi:10.13890/j.issn.1000-128x.2013.04.015]
 HOU Jian-wen,LIU Jian-xin,CHEN Di-lai,et al.Influence of Lateral Mounting Position of Anti-hunting Motion Dampers on Locomotive Dynamic Performance[J].Electric Drive for Locomotives,2013,(03):32.[doi:10.13890/j.issn.1000-128x.2013.04.015]
[8]陈泽武.机车空调电源的比较与分析[J].机车电传动,2013,(04):44.[doi:10.13890/j.issn.1000-128x.2013.04.018]
 CHEN Ze-wu.Comparison and Analysis of Locomotive Air-conditioner Power Supply[J].Electric Drive for Locomotives,2013,(03):44.[doi:10.13890/j.issn.1000-128x.2013.04.018]
[9]王梅,李文波,杨颖.机车辅助变流器控制平台软件单元测试应用实践[J].机车电传动,2012,(06):77.[doi:10.13890/j.issn.1000-128x.2012.06.001]
 WANG Mei,LI Wen-bo,YANG Yin.Practical Application for Software Unit Testing of Locomotive Auxiliary Converter Control Platform[J].Electric Drive for Locomotives,2012,(03):77.[doi:10.13890/j.issn.1000-128x.2012.06.001]
[10]张建军,张群福.韶山系列机车轴箱轴承不落轮更换装置[J].机车电传动,2011,(06):83.[doi:10.13890/j.issn.1000-128x.2011.06.005]

备注/Memo

备注/Memo:
作者简介:吴承书(1978-),男,硕士研究生,工程师,从事轨道交通用速度传感器的研发工作。
更新日期/Last Update: 2013-05-10