[1]吕士勇,郭春杰,刘文松,等.可拆卸锥面配合型扭杆研制[J].机车电传动,2013,(02):78-80.[doi:10.13890/j.issn.1000-128x.2013.02.025]
 LV Shi-yong,GUO Chun-jie,LIU Wen-song,et al.Manufacture of Removable Cone-cooperate Type Anti-roll Bar[J].Electric Drive for Locomotives,2013,(02):78-80.[doi:10.13890/j.issn.1000-128x.2013.02.025]
点击复制

可拆卸锥面配合型扭杆研制()
分享到:

机车电传动[ISSN:1000-128X/CN:43-1125/U]

卷:
期数:
2013年02期
页码:
78-80
栏目:
试验检测
出版日期:
2013-03-10

文章信息/Info

Title:
Manufacture of Removable Cone-cooperate Type Anti-roll Bar
文章编号:
1000-128X(2013)02-0078-03
作者:
吕士勇郭春杰刘文松王京雁罗斌
(株洲时代新材料科技股份有限公司,湖南株洲412007)
Author(s):
LV Shi-yong GUO Chun-jie LIU Wen-song WANG Jing-yan LUO Bin
(Zhuzhou Times New Material Technology Co., Ltd., Zhuzhou, Hunan 412007, China)
关键词:
抗侧滚扭杆锥面配合油压拆卸刚度
Keywords:
anti-roll bar cone-cooperate type hydraulic disassembly rigidity
分类号:
U260.331
DOI:
10.13890/j.issn.1000-128x.2013.02.025
摘要:
介绍了可拆卸锥面配合型扭杆的研制过程,并对可拆卸锥面配合型扭杆的设计、计算和加工过程进行了描述。油压和推力结合拆卸试验及整体刚度试验结果表明可拆卸锥面配合型扭杆的工艺方式和设计结构满足使用要求。
Abstract:
Manufacturing process of removable cone-cooperate type anti-roll bar was introduced, and designing, calculation and machining of the anti-roll bar were described. Hydraulic and thrust combination removing test and rigidity test results showed that the removable cone-cooperate type anti-roll craft manner and design structure met the requirement

参考文献/References:

[1] 刘文松,郭春杰. 符合法铁标准的抗侧滚扭杆轴的工艺研制[J]. 铁道车辆,2007,7(45) :10-13.
[2] Cerit M, Nart E, Genel K. Investigation into effect of rubber bushing on stress distribution and fatigue behavior of anti-roll bar[J]. Engineering Failure Analysis,2010(17) :1019-1027.
[3] GB/T 15755,圆锥过盈配合的计算和选用[S]

相似文献/References:

[1]郭晓军,卜继玲,曾晶晶,等. 基于FKM 准则的抗侧滚扭杆疲劳强度分析[J].机车电传动,2016,(06):1.[doi:10.13890/j.issn.1000-128x.2016.06.102]
 GUO xiaojun,BU jiling,ZENG jingjing,et al. Fatigue Strength Analysis of Anti-roll Torsion Bar Based on the FKM Guideline[J].Electric Drive for Locomotives,2016,(02):1.[doi:10.13890/j.issn.1000-128x.2016.06.102]
[2]郭晓军,卜继玲,曾晶晶,等.基于FKM准则的抗侧滚扭杆疲劳强度分析[J].机车电传动,2016,(06):39.[doi:10.13890/j.issn.1000-128x.2016.06.102]
 GUO xiaojun,BU jiling,ZENG jingjing,et al.Fatigue Strength Analysis of Anti-roll Torsion Bar Based on the FKM Guideline[J].Electric Drive for Locomotives,2016,(02):39.[doi:10.13890/j.issn.1000-128x.2016.06.102]
[3]王京雁,卜继玲,曾晶晶,等.基于ABAQUS子模型算法的花键连接抗侧滚扭杆有限元分析[J].机车电传动,2011,(06):28.[doi:10.13890/j.issn.1000-128x.2011.06.009]
[4]毕鑫,罗世辉,马卫华.抗侧滚扭杆安装方式对城轨车辆曲线通过性能影响[J].机车电传动,2011,(06):58.[doi:10.13890/j.issn.1000-128x.2011.06.016]
[5]江现昌,王云峰,罗宗渝.地铁抗侧滚扭杆关节轴承产生异响的分析及改进措施[J].机车电传动,2018,(01):100.[doi:10.13890/j.issn.1000-128x.2018.01.022]

备注/Memo

备注/Memo:
作者简介:吕士勇(1983-),男,硕士,主要从事抗侧滚扭杆的研究开发。
更新日期/Last Update: 2013-03-10