[1]肖守讷,杨冰,曲天威,等.EN13749标准在机车轴箱体强度分析中的推演应用[J].机车电传动,2013,(02):38-41.[doi:10.13890/j.issn.1000-128x.2013.02.012]
 XIAO Shou-ne,YANG Bing,QU Tian-wei,et al.Extrapolation and Application of Standard EN 13749 in Strength Analysis of Locomotive Axle-Box Body[J].Electric Drive for Locomotives,2013,(02):38-41.[doi:10.13890/j.issn.1000-128x.2013.02.012]
点击复制

EN13749标准在机车轴箱体强度分析中的推演应用()
分享到:

机车电传动[ISSN:1000-128X/CN:43-1125/U]

卷:
期数:
2013年02期
页码:
38-41
栏目:
研究开发
出版日期:
2013-03-10

文章信息/Info

Title:
Extrapolation and Application of Standard EN 13749 in Strength Analysis of Locomotive Axle-Box Body
文章编号:
1000-128X(2013)02-0038-04
作者:
肖守讷1杨冰1曲天威12朱涛1
1. 西南交通大学牵引动力国家重点实验室 2. 中国北车集团大连机车车辆有限公司
Author(s):
XIAO Shou-ne1 YANG Bing1 QU Tian-wei 12 ZHU Tao1
( 1. Traction Power State Key Laboratory, Southwest Jiaotong University, Chengdu, Sichuan 610031, China; 2. Dalian Locomotive and Rolling Stock Co., Ltd., CNR Group, Dalian, Liaoning 116022, China )
关键词:
轴箱体强度分析标准推演有限元计算EN1374 标准
Keywords:
axle-box body strength analysis standard extrapolation finite element calculation EN 13749
分类号:
U260.6+1, U260.33
DOI:
10.13890/j.issn.1000-128x.2013.02.012
摘要:
针对已有轴箱试验标准未涵盖轴箱体强度校核与分析这一现状,通过比较各构架相关标准的适用范围、载荷类型和工况种类,揭示出EN 13749 标准具有包含转向架类型丰富、外载考虑充分、载荷组合方式明确等特点,适于推演应用到轴箱体强度评定中。在标准推演过程中,充分考虑轴箱体与构架的承载方式、大小和种类的差异,合理地确定了轴箱体强度计算的载荷条件与工况组合。最后,以推演的EN 13749 标准为指导,完成了对出口某国机车轴箱体的静强度与疲劳强度校核。
Abstract:
According to existing standards for axle-box test not covering check and analysis of axle-box body, application scope, force types, and load cases were compared among several test standards for bogie frames. It was revealed that standard EN 13749 had the characteristics of wide variety of bogie categories, full consideration to loads, and definite method for force combination, which was suitable for extrapolation and application in strength assessment of axle-box body. During the extrapolating process of standard, the difference in force bearing way, magnitude and kinds of loads between axle-box body and frame were fully considered, so that the force types and the load cases were determined for strength calculation of axle-box body reasonably. Furthermore, with the guide of the extrapolated standard EN 13749, static and fatigue strength analysis for the axle-box body of certain exporting locomotive was accomplished.

参考文献/References:

[1] 褚延国,邢春阳. CW- 2系列转向架轴箱弹簧定位座裂纹原因分析及改进措施[J]. 铁道车辆,2006,44(12):42- 43.
[2] 蒋玉峰. CW- 2( 1)型转向架轴箱断裂原因分析及改进[J]. 铁道机车车辆工人,2010(9):24-26.
[3] 刘万选,王红,商跃进. Y25型新型转向架轴箱强度性能分析[J]. 兰州交通大学学报,2010,29(4):115- 118.
[4] 张立志,郭洋. D2型凹底平车轴承换装后轴箱强度有限元分析[J]. 机械工程师,2011(6):105-106.
[5] 吴敏,黄志辉. 八轴机车轴箱三维结构设计及强度计算[J]. 内燃机车,2008(11):15-17.
[6] 杨继震. CRH2动车组拖车轮对轴箱强度分析[D]. 北京:北京交通大学,2007.
[7] European Committee for Standardization. EN 13749: 2005 Railway Applications- Methods of Specifying Structural Requirements of Bogie Frames[S]. London: British Standards Institution, 2005.
[8] 刘德刚,刘宏友,李庆升. 转向架构架强度试验标准对比[J]. 铁道车辆,2011,49(9):12-17. [9] 张春良,许呈祥,唐先贺. 几种典型机车用轴箱拉杆对比分析[J]. 机车电传动,2009(6):18-20.
[10]Nishijima Satoshi. Statistical Analysis of Fatigue Test Data [J]. The Society of Materials Science,1980,29(16):24-29.

相似文献/References:

[1]杨旭,刘书海,郭丹.CRH3型动车组冷却风扇支架结构强度分析与检测[J].机车电传动,2014,(03):94.[doi:10.13890/j.issn.1000-128x.2014.03.018]
 YANG Xu,LIU Shu-hai,GUO Dan.Analysis and Inspection for CRH3 EMUs Cooling FanSupport Frame Structural Strength[J].Electric Drive for Locomotives,2014,(02):94.[doi:10.13890/j.issn.1000-128x.2014.03.018]
[2]李瑞霞,赵力,齐双强,等.轨道车辆车轴强度及疲劳裂纹扩展寿命分析[J].机车电传动,2013,(02):74.[doi:10.13890/j.issn.1000-128x.2013.02.024]
 LI Rui-xia,ZHAO Li,QI Shuang-qiang,et al.Analysis of Rail Vehicle Axle Strength and Fatigue Crack Propagation Life[J].Electric Drive for Locomotives,2013,(02):74.[doi:10.13890/j.issn.1000-128x.2013.02.024]
[3]李瑞霞,齐双强.GCY300II型轨道车转向架构架强度分析与结构改进[J].机车电传动,2012,(04):74.[doi:10.13890/j.issn.1000-128x.2012.04.018]
 LI Rui-xia,QI Shuang-qiang.GCY300II Type Rail Car Bogie Frame Strength Analysis and Structural Improvement[J].Electric Drive for Locomotives,2012,(02):74.[doi:10.13890/j.issn.1000-128x.2012.04.018]
[4]张 航,邬平波. 基于ABAQUS的车体强度分析[J].机车电传动,2017,(04):1.[doi:10.13890/j.issn.1000-128x.2017.04.103]
 ZHANG Hang,WU Pingbo. Strength Analysis on Railway Carbody Based on ABAQUS[J].Electric Drive for Locomotives,2017,(02):1.[doi:10.13890/j.issn.1000-128x.2017.04.103]
[5]张 航,邬平波.基于ABAQUS 的车体强度分析[J].机车电传动,2017,(04):32.[doi:10.13890/j.issn.1000-128x.2017.04.103]
 ZHANG Hang,WU Pingbo.Strength Analysis on Railway Carbody Based on ABAQUS[J].Electric Drive for Locomotives,2017,(02):32.[doi:10.13890/j.issn.1000-128x.2017.04.103]
[6]何 宙,邬平波,刘潮涛,等. 基于VDV 152—2016 的低地板车辆构架载荷研究[J].机车电传动,2019,(01):1.[doi:10.13890/j.issn.1000-128x.2019.01.123]
 HE Zhou,WU Pingbo,LIU Chaotao,et al. Load Research of Low-Floor Vehicles Bogie Frame Based on VDV 152—2016[J].Electric Drive for Locomotives,2019,(02):1.[doi:10.13890/j.issn.1000-128x.2019.01.123]
[7]何 宙,邬平波,刘潮涛,等.基于VDV 152—2016的低地板车辆构架载荷研究[J].机车电传动,2019,(01):87.[doi:10.13890/j.issn.1000-128x.2019.01.123]
 HE Zhou,WU Pingbo,LIU Chaotao,et al.Load Research of Low-Floor Vehicles Bogie Frame Based on VDV 152—2016[J].Electric Drive for Locomotives,2019,(02):87.[doi:10.13890/j.issn.1000-128x.2019.01.123]
[8]张 明,智鹏鹏. 基于Workbench 的B 型转向架构架结构优化设计与试验验证[J].机车电传动,2019,(04):1.[doi:10.13890/j.issn.1000-128x.2019.04.112]
 ZHANG Ming,ZHI Pengpeng. Optimization Design and Experimental Verification of Type B Bogie Structure Based on Workbench[J].Electric Drive for Locomotives,2019,(02):1.[doi:10.13890/j.issn.1000-128x.2019.04.112]
[9]张明,智鹏鹏.基于Workbench的B型转向架构架结构优化设计与试验验证[J].机车电传动,2019,(04):67.[doi:10.13890/j.issn.1000-128x.2019.04.112]
 ZHANG Ming,ZHI Pengpeng.Optimization Design and Experimental Verification of Type B Bogie Frame Structure Based on Workbench[J].Electric Drive for Locomotives,2019,(02):67.[doi:10.13890/j.issn.1000-128x.2019.04.112]

备注/Memo

备注/Memo:
作者简介:肖守讷(1964-),男,硕士,博士生导师,主要从事机车车辆强度、车体耐撞性研究。
更新日期/Last Update: 2013-03-10